Email this page

TRIGENSNTM Intramedullary Nails

TRIGEN Drill Guide

	One Drill Guide for implanting any TRIGEN◊ Nail. One Guide Bolt for attaching any TRIGEN◊ nail to the Drill Guide.
	Standard Femoral Locking: The TRIGEN◊ Drill Guide is used to target the placement of the proximal screw at 45° from the greater trochanter to lesser trochanter.
	Recon Femoral Locking: The Hip Guide is attached to the Drill Guide to target two proximal 6.4 mm screws at 130° into the femoral head.
	Knee Guide: Attaches to the Drill Guide when implanting Knee Nails. It targets the screw holes at the driving end of the implant.
	Supracondylar Guide: Attaches to the Drill Guide to target the placement of the transverse screws in the short Knee Nails.
	8.5 mm FAN Guide: Attaches to the Drill Guide to target the placement of the 4.5 mm screws into the femoral head or transversely.

Features	Benefits
Release Mechanism	Allows the nail to be easily removed from the drill guide. The rounded tip of the guide bolt wrench slips down the slot at the top of the drill guide to locate the guide bolt and disengage the bolt from the nail. This feature is especially convenient when managing a large amount of soft tissue.
Simple Attachments for Guides	The Hip, Knee and 8.5 mm FAN guide attachments are designed to attach to the drill guide in only one way.
Knurled Knobs	The knurled knobs make it easy to secure the guide-attachments to the drill guide. Also, the knobs have holes that allow an instrument to be inserted for additional leverage for tightening and untightening.