Email this page

Mandatory fields are marked with an asterisk [*].

Fill in your email details
1. * Your name:
2. * Your email address:
3. * Recipient name:
4. * Recipient email address:
Note: Smith & Nephew does not collect or make use of the email addresses or names provided here. They are only used to show the recipient who has sent the message.
Change the message if you want to
1. To: <recipient name> <address>
2. From: <sender name> <address>
3. Subject: <sender name> is sending you a link
4. Hi,
  I saw this on the Smith & Nephew site and thought you might be interested.
5. <sender name>

OXINIUM™

Oxidized Zirconium

OXINIUM References

References

1. R.H. Zimlich, M. Levesque, W. Jones, H.D. Schutte, Jr., B.J. Livingston, W. Sauer, M. Spector, and K. Weaver, "In-vitro and in-vivo effect of particulate debris on TKA articulating surfaces", scientific exhibit SE038, 65th Ann. Mtg. Am. Acad. Orthop. Surg., New Orleans, LA, March 19-23, 1998.

2. M. Levesque, B.J. Livingston, W.M. Jones, and M. Spector, "Scratches on condyles in normal functioning total knee arthroplasty", Trans. 44th Ann. Mtg. Orthop. Res. Soc., Orthopaedic Research Society, Chicago, IL, 1998, p. 247.

3. M. Long, L. Riester, and G. Hunter, “Nano-hardness measurements of oxidized Zr-2.5Nb and various orthopaedic materials”, Trans. Soc. Biomaterials, 21, 1998, p. 528.

4. G. Hunter and M. Long, “Abrasive wear of oxidized Zr-2.5Nb, CoCrMo, and Ti-6Al-4V against bone cement”, 6th World Biomaterials Cong. Trans., Society For Biomaterials, Minneapolis, MN, 2000, p. 835.

5. G. Hunter, “Adhesion testing of oxidized zirconium”, Trans. Soc. Biomaterials, 24, 2001, p. 540.

6. S. Tsai, J. Sprague, G. Hunter, R. Thomas, and A. Salehi, “Mechanical testing and finite element analysis of oxidized zirconium femoral components”, Trans. Soc. Biomaterials, 24, 2001, p. 163.

7. L. Que, L.D.T. Topoleski, and N.L. Parks, "Surface roughness of retrieved CoCrMo alloy femoral components from PCA artificial total knee joints", J. Biomed. Mater. Res., 53 (1), 1999, pp. 111- 118.

8. J.G. Lancaster, D. Dowson, G.H. Isaac, and J. Fisher, "The wear of ultra-high molecular weight polyethylene sliding on metallic and ceramic counterfaces representative of current femoral surfaces in joint replacement", Proc. Instn. Mech. Engrs., 211 (H1), 1997, pp. 17-24.

9. J. Fisher, P. Firkins, E.A. Reeves, J.L. Hailey, and G.H. Isaac, "The influence of scratches to metallic counterfaces on the wear of ultra-high molecular weight polyethylene", Proc. Instn. Mech. Engrs., 209 (H4), 1995, pp. 263-264.

10. J.L. Hailey, E. Ingham, M. Stone, B.M. Wroblewski, and J. Fisher, "Ultra-high molecular weight polyethylene wear debris generated in vivo and in laboratory tests; the influence of counterface roughness", Proc. Instn. Mech. Engrs., 210 (H1), 1996, pp. 3-10.

11. B. Weightman and D. Light, "The effect of the surface finish of alumina and stainless steel on the wear rate of UHMW polyethylene", Biomaterials, 7 (1), 1986, pp. 20-24.

12. H. Oonishi, Y. Hanatate, E. Tsuji, and H. Yunoki, "Comparisons of wear of UHMW polyethylene sliding against metal and alumina in total knee prostheses", Bioceramics, H. Oonishi, H. Aoki, and K. Sawai (eds.), Ishiyaku EuroAmerica, Tokyo, 1989, pp. 219-224.

13. J.A. Davidson, "Characteristics of metal and ceramic total hip bearing surfaces and their effect on long-term ultra high molecular weight polyethylene wear", Clin. Orthop., 294, 1993, pp. 361-378.

14. J. Fisher and D. Dowson, "Tribology of total artificial joints", Proc. Instn. Mech. Engrs., 205 (H2), 1991, pp. 73-79.

15. M. Jasty, C.R. Bragdon, K. Lee, A. Hanson, and W.H. Harris, "Surface damage to cobalt-chrome femoral head prostheses", J. Bone Joint Surg., 76-B (1), 1994, pp. 73-77.

16. R.Barrack, F.Castro, E. Szuszczewicz, T.Schmalzried, “Analysis of Retrieved Uncemented Porous-Coated Acetabular Components in Patients With and Without Pelvic Osteolysis”, Orthopedics, 25:12, 2002, pp. 1373-1378.

17. Sychterz CJ, Engh CA Jr, Swope SW, McNulty DE, Engh CA, “Analysis of prosthetic femoral heads retrieved at autopsy”, Clin Orthop. 1999 Jan; (358):223-34.

18. R.A. Poggie, J.J. Wert, A.K. Mishra, and J.A. Davidson, “Friction and wear characterization of UHMWPE in reciprocating sliding contact with Co-Cr, Ti-6Al-4V and zirconia implant bearing surfaces”, Wear and Friction of Elastomers, ASTM STP 1145, R. Denton and M.K. Keshavan (eds.), American Society for Testing and Materials, Philadelphia, PA, 1992, pp. 65-81.

19. A.M. Patel and M. Spector, “Tribological evaluation of oxidized zirconium using an articular cartilage counterface: a novel material for potential use in hemiarthroplasty”, Biomaterials, 18 (5), 1997, pp. 441-447.

20. M. Spector, M.D. Ries, R.B. Bourne, W.S. Sauer, M. Long, and G. Hunter, “Wear performance of ultra-high molecular weight polyethylene on oxidized zirconium total knee femoral components”, J. Bone Joint Surg., 83-A (S2), 2001, pp. 80-86.

21. N.J. Hallab, K. Merritt, and J.J. Jacobs “Metal sensitivity in patients with Orthopaedic implants”, J. Bone Joint Surg., 83-A, March, 2001, pp. 428-436.

22. G. Hunter, W.M. Jones, and M. Spector, “Oxidized zirconium”, Total Knee Arthroplasty, J. Bellemans, M.D. Ries, and J. Victor (eds.), Springer Verlag, Heidelberg, Germany, 2005, pp. 370-377.

Jani et al, ORS, 49, 2002.

Good V, Ries M, Barrack RL, Widding K, Hunter G, Heuer D, Reduced Wear with Oxidized Zirconium Femoral Heads, JBJS in print, 2003.

M.D. Ries, W.L. Sauer, S.A. Banks, M. Anthony, and K. Weaver, "Effect of femoral component scratches on wear in total knee arthroplasty", Am. Acad. Orthop. Surg. 66th Ann. Mtg. Proc., American Academy of Orthopaedic Surgeons, Rosemont, IL, 1999, p. 231.

M. Ries, S. Banks, W. Sauer, and M. Anthony, "Abrasive wear simulation in total knee arthroplasty", Trans. 45th Ann. Mtg. Orthop. Res. Soc., Orthopaedic Research Society, Chicago, IL, 1999, p. 853.