Email this page
close560 SERIES
High Definition Camera System
The 560 Series
The only definition that matters
The Advanced Television Systems Committee (ATSC), an international non-profit organization that develops voluntary standards for digital television, defines the standard for HDTV as follows:
Aspect Ratio: Must be capable of displaying wide screen 16:9 format. Standard definition television (SDTV) has a 4:3 aspect ratio.
Pixel Quantity: Meets or exceeds 1280 x 720p, or 1920 x 1080i.
Scanning Pattern: 720p (progressive scan) or 1080i (interlaced scan).
560P High Definition Camera System
| Power | 100 - 240 VAC, 50/60 Hz; |
| Requirements | Dual fuse |
| Classification | CISPR 11 Class A |
| Equipment Classification | Protection against electrical shock Class 1 with CF type applied part. Protection against harmful ingress of water. (Ordinary equipment, none provided) Degree of safety application in the presence of flammable anesthetics with mixture of air, oxygen, or nitrous oxide. (Not suitable) |
| CCU Dimensions | 4.25" H x 12" W x 15" D |
| CCU Weight | 9.9 pounds |
| Display Output | 50/60 Hz |
| Resolution | 1920 x 1080i (native) |
| Signal-to-Noise | 64 dB |
| Ratio Shutter | NTSC: 1/60 per second through 10,000 per second shutter speed PAL: 1/50 per second through 10,0000 per second shutter speed |
HD Serial Digital Interface (HD-SDI) One serial digital interface (SDI) with 4:2:2 component digital video output on BNC connector
HD Digital Visual Interface (HD-DVI) Two digital visual interfaces supporting DVI-Digital (DVI-D) single-link interfaces on 29-pin DVI-I connector with 4:4:4 component digital video output on BNC connector
YPrPb Video Output One video output 1Vp-p, YPrPb or Component video into 75Ω, BNC coaxial connectors
IEEE-1394 Output One IEEE-digital video output, 4-pin connector; provides continuous DV-formatted (5:1) compressed 25 Mb/sec data rate
Y/C Video Outputs Two Y/C video outputs, combined luminance/chroma signal into 4-pin mini-DIN plug
Composite Output One analog, encoded video signal that includes vertical and horizontal synchronizing information
AC Leakage Current Camera control unit: less than 300 microamps earth leakage
Video Accessory Controls Two mini-phono connectors (3.5 mm)
| Equipment | Protection against electrical shock |
| Classification | Class I, applied part Type CF |
| Video Imager | Three 1/3" Interline Transfer Micro-Lens high sensitivity CCD Image Sensors |
| Imaging Resolution | Vertical: 1080i native TV lines Horizontal: 1920 native TV lines |
| Signal-to-Noise Ratio | >64 dB |
| Video Data Acquisition | Three 14-bit RGB channels, digitized inside camera head |
| Video Data Transmission | High-speed, low-voltage differential serial (LVDS), uncompressed 42-bit RGB digital transmission via 12-foot camera cable |
| Video Output Format | Full HD 1080i, 100% compatible with SMPTE-274M:2005 HDTV broadcast standard when used with the 560P Camera Control Unit |
| Video Field Rate | 60 Hz or 50 Hz universal camera head, software switchable |
| Operating Temperature | 41° - 108° F (-20° -60° C) |
| Operating Humidity | 38 - 75% non-condensing |
| Storage Temperature | -4° - 140° F (-20° -60° C) |
| Storage Humidity | 20 - 90% non-condensing |
| Camera Head Dimensions | 1.8" x 2.6" x 2.25" (width x depth x height) |
| Camera Head Weight | 161 grams |
| Camera Head Cable | 12' +/-3" (3.65 m +/- 7.6 cm) |
| Lens Mount | 1"-32 UN C-mount thread |
| Compatible Control Units | Smith & Nephew 560P High Definition Camera System |