Product Specifications
An RS-232 port is provided on the back of the INSUFFLATOR for HERMES connectivity
INSUFFLATOR	IN-LINE GAS WARMER-HUMIDIFIER
Dimensions (WxHxD) 13.3 x 6.9 x 14.8 in 338 x 176 x 376 mm Weight Unit with dual warmers 19 lbs 8.64 kg Gas Flow Unit Adjustable from 0 - 20 lpm with one patient line Adjustable from 0 - 40 lpm with two patient lines Pressure Adjustment 0 - 25 mmHg operating Pressure Relief Electronically controlled relief of displayed pressure at 1 mmHg above SETPOINT value. Fixed relief of pressure at 50 mmHg. Audible alarm when the abdomen pressure is more than 5 mmHG above the SETPOINT level for 2.5 seconds. Gas Inlet Single E-cylinder tank, or central wall supply	Size (LxD) 4.5 x 2.0 in (9.8 ft power cord) 114 x 51 mm (3 m power cord) Weight 5 oz 142 g Power 50 watts Flow Rate This device is not intended for use with a flow rate greater than 20 l/min

A unique in-line mechanism delivers warmed and humidified gas in close proximity to the patient	A gas humidification sheath holds sterile water and allows the GAS Warmer-Humidifer to maintain constant flow of moisture into the abdomen
IN-LINE GAS WARMER  Size (LxD) 3.44 x 1.0 in (9.8 ft power cord) 87.4 x 25.4 mm (3 m power cord) Weight 4.68 oz 133 g Gas Temperature Non-adjustable 95 - 106° F 35 - 41° C Power 24 watts Flow Rate This device is not intended for use with a flow rate greater than 20 l/min	ELECTRICAL REQUIREMENTS Voltage Input 100 to 240 VAC nominal line voltage; 50/60 Hz Power Insufflator Only 25 watts, double fusing with removable power cord Insufflator and two In-Line Gas Warmers 75 watts Insufflator and two Gas Warmers-Humidifiers 125 watts Standards UL 2601-1; IEC 60601; CAN CSA C22.2 No. 601.1.1-M90; IEC 60601-1-2:2001; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-5; IEC 61000-4-6 IEC 61000-4-8; IEC 61000-4-11; IEC 61000-3-2; IEC 610000-3-3; CISPR 11; EN 55011 Classification Control Unit: Class I, Type B In-Line GasWarmer: Class I, Type BF Gas Warmer-Humidifier