3.5mm Anterior Distal Tibia Locking Plate
Scalloped to allow lag screw placement without compromising plate position Contour facilitates an anterior approach to distal tibia fractures in the coronal plane Consistent 1.5mm plate thickness Left and right specific
3.5mm Medial Distal Tibia Locking Plate
Smooth distal tip minimises soft tissue irritation over the medial malleolus 2.0mm – 1.5mm proximal to distal plate thickness transition Contour facilitates a medial approach to distal tibia fractures in the saggital plane Left and right specific
3.5mm Posterior Distal Tibia Locking Plate
Scalloped to allow lag screw placement without compromising plate position Contour facilitates a posterior approach to distal tibia fractures in the coronal plane Consistent 1.5mm plate thickness Left and right specific

Polyaxial Locking Plate
Each PERI-LOC◊ VLP screw hole contains five separate tabs that engage with the threads of the locking screw head to form a fixed angle construct. Locking screws can be angled and locked up to 15° in any direction allowing for the creation of customised, multi-directional locked plating constructs. Each screw hole accepts 3.5mm Cortex, 3.5mm Locking and/or 5.0mm Osteopenia Screws.
Low Profile Implants
The profile of the PERI-LOC◊ VLP locking plate is designed to ensure low profile fracture fixation in areas of minimal soft tissue coverage such as periarticular zones. All screws in the PERI-LOC◊ VLP Locked Plating System have a low head profile to further reduce the potential for soft tissue irritation in these sensitive areas.
Optimal Plate Contour
The optimised contour of the PERI-LOC◊ VLP locking plate facilitates both fracture reduction and stabilisation as it is compressed to bone. This “compression contouring” feature is essential to the implant's ability to resist torque and bending during fracture healing. Once securely fixed in place, the plate produces a constant buttress effect to the fracture site to prevent loss of reduction and to enhance overall fracture fixation.

The PERI-LOC◊ VLP Distal Tibia Plates are indicated for the treatment of partial articular fractures of the distal tibia (AO/OTA Fracture Classification Type B).

The PERI-LOC◊ VLP Distal Tibia Plates are contraindicated for the treatment of AO/OTA Fracture Classification Types A & C and fractures with extreme metaphyseal comminution or dissociation of the articular segment from the shaft.