Global

‡ In these countries please contact our distributor

D-RAD SMART PACK

Single-Use Volar Distal Radius Plating System

D-RAD SMART PACK

Product Information

The D-RAD SMART PACK System was designed to treat the most commonly plated extra-articular and intra-articular distal radius fractures. The system contains (a) four different single-use kits and (b) a tray with sterile fasteners and single-use plate templates to assist with kit selection.

4-Hole Volar Plate

  • Anatomically contoured to respect the watershed line while providing reconstructive articular support
  • VLP locking technology enables the use of Cortex Screw, Locking Screws or Locking Pegs within a 30 degree cone
  • 1.4mm K-wire holes for distal plate positioning
  • Slotted 1.4mm K-wire hole or slotted screw hole to allow for proximal/distal plate adjustments
  • 1.4mm K-wire hole to enable centering of the plate on the diaphysis

Standard and wide options accommodate varying patient anatomy


Screws/Pegs

  • 2.4mm Cortex Screws
  • 2.4mm Variable Angle Locking Screws
  • 1.8mm Variable Angle Locking Pegs for bicortical support of the metaphysis while minimizing dorsal soft tissue irritation

Predetermined screw angles with Fixed Angle Drill Guide or lock within a 30 degree cone with Variable Angle Drill Guide.

Indications of the D-RAD SMART PACK System

The D-RAD SMART PACK Single-Use Volar Distal Radius Plating System is indicated for the fixation of fractures involving the distal radius.

 

For product availability specific to your country, please select your country location.

This information is intended for health care professionals only.

*The decision to use Smith & Nephew products should be made by a healthcare professional, in line with applicable local protocols.  Smith & Nephew products should always be used for the indications set out in the applicable instructions for use.